SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
4,075,119 Fronius - MagicWave 2200 Job Water-Cooled TIG Welder Power Source with F++ Connection, 230V 1 Phase
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 4,075,119  

    Fronius - MagicWave 2200 Job Water-Cooled TIG Welder Power Source with F++ Connection, 230V 1 Phase
    4,075,119

    £5245.30  EX VAT
     Buy in 3 easy interest free payments of £1748.43† with

    ActiveWave technology boosts profitability.

    The MagicWave 2200 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology and is characterised by the softest possible yet highly stable arc. It has an output of 220A, is both light and robust and self-explanatory in operation. The power source is also ideally suited to portable use in chemical, container, machine and plant construction, installation firms, metal construction, maintenance and repair companies, and pipeline construction.

    At 17.4Kg, the MagicWave 2200 Job is among the lightest in the world and can be carried anywhere. Its robust design makes it fully compatible with construction sites. It can work on a 230V connection and can weld any low or high-alloy steel, aluminium and its alloys and non-ferrous metals. The Job version enables cold wire control and automated use.

    Related Items

    Fronius AC / DC TIG Welders FAQs

    Straight answers to the questions people ask most when choosing and using AC/DC TIG welders, especially for aluminium.

    What does AC frequency change in the arc?icon-minus-redicon-plus-red

    Frequency is how many times per second the current alternates. A lower frequency gives a softer, wider arc that is forgiving and suits thicker material or wide beads. A higher frequency gives a tighter, stiffer, more focused arc that helps with fillet joints, edge welds, thin sheet and precise control around corners.

    There is no single correct figure. Try a few settings on offcuts of the same material and joint type, and choose the one where the puddle is easy to steer and the bead looks even.

    Should I choose a gas-cooled or water-cooled machine?icon-minus-redicon-plus-red

    It depends on the current you use and how long you weld without a break. Gas-cooled torches suit light to medium work and shorter weld times, and are simpler because there is no coolant to look after. Water-cooled setups use a separate cooling unit and a torch with a coolant circuit, which keeps the torch comfortable and protects it during long, high-current welding.

    Aluminium often needs more current than steel of the same thickness, so water cooling is common for heavier aluminium fabrication. Check the duty cycle rating for the current you actually plan to use.

    Single phase, three phase or multi-voltage: which supply do I need?icon-minus-redicon-plus-red

    Start by checking what your premises can supply. Single-phase machines run from a single-phase supply but are limited in maximum output, and larger ones may need a higher-rated socket than a standard one. Three-phase machines suit workshops with a three-phase supply and give more power for thicker material. Multi-voltage machines adapt to different supply voltages.

    Output may differ depending on the supply you connect to, so check the data plate and manual for your own machine, which give the rated output at each voltage. Have a qualified electrician confirm the supply, fuse rating and cable before installation.

    What is the difference between a power source and a package?icon-minus-redicon-plus-red

    A power source is the machine on its own. A package normally adds the items needed to start welding, such as a torch, an earth lead and a gas hose, and sometimes a cooling unit or a remote control. The contents differ from set to set, so read the description closely.

    Check that the torch is the right type for the machine, with the correct connection and cooling method, and that the leads are long enough for your work area. If you are adding your own torch or accessories, confirm they are compatible with the machine's connections.

    See all 6 questions for this category

    Shop Similar Categories