0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
EU made hand scratch brush.
Straight answers to the questions people ask most about chipping hammers, wire brushes and electrode canisters.
Stick electrodes leave a layer of slag over the weld that protects the weld metal while it cools. If the next run is laid over slag that was not removed, the slag can become trapped in the weld as a defect known as slag inclusion, which weakens it.Chip the slag off, then wire brush the weld clean before the next run and before inspection. Pay attention to the toes of the weld and the edges of the joint, where slag tends to hide. Always wear eye protection when chipping.
Most chipping hammers have a pointed end for cracking slag and a chisel end for lifting it, so you can reach corners and flat areas. Choose one that feels balanced and comfortable in your hand for a full day.Handles can be wood, tubular steel or spring steel. A spring handle absorbs some of the shock, which reduces fatigue, while a plain handle is simpler and tough. Wood handles are comfortable but can wear or work loose. The head should be hard enough to chip slag but not so hard that it chips itself.
Plain steel brushes are the usual choice for cleaning carbon steel. Stainless steel brushes are used on stainless steel so that particles of carbon steel are not left on the surface, where they can cause rust spots. Brass brushes have softer bristles, which are gentler on the surface and suit softer metals and more delicate work.The number of rows and the bristle thickness affect stiffness and reach. Choose the brush material to suit the metal you are cleaning.
It is best not to. A brush that has been used on mild steel leaves tiny particles of carbon steel on stainless steel, which can rust and spoil the corrosion resistance of the surface.Keep a brush for stainless steel only, and mark it so it does not get mixed up. The same applies to aluminium: use a clean brush kept for that metal. Clean the work and the brush, and keep stainless tools away from carbon steel workshop dust.