0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Essential consumable kits keep your Powermax up and running with an array of genuine Hypertherm cutting consumables.
Kit Contents
6 x Hypertherm Electrode for Duramax Hyamp
6 x Hypertherm 125 Amp Nozzles - Duramax Hyamp
Hypertherm Retaining Cap, for Duramax Hyamp Torch (30 - 125A)
Hypertherm Swirl Ring, for Duramax Hyamp Torch (30 - 125A)
2 x Hypertherm Hand Drag Cutting Shields - 125 Amp Duramax Hyamp
Straight answers to the questions people ask when choosing and using a plasma torch consumable kit.
A kit gathers the wearing parts of a plasma torch into one box. On many torches the main consumables are the electrode, nozzle, swirl ring, retaining cap and shield, while some newer systems use a single-piece cartridge instead of a set of separate parts. The contents vary by torch and by kit type.Kits suit anyone who wants a matched set for a particular torch, or who wants to refresh a torch that has been running on worn parts. Check the contents list against your torch's consumable chart.
Ohmic sensing is a way for a cutting machine to find the plate: an electrical contact between the torch and the plate tells the height control where the surface is before the arc fires. It is only relevant to mechanised cutting.If your cutting table's height control uses ohmic sensing, the torch needs the contact ring or cap made for it, connected as the height control manual describes. If it does not, you do not need one. Handheld torches do not use this feature. Check your cutting table's manual first.
Start with the torch and power source, not just the amperage. Consumables are specific to the cutting current, the material and the application, so confirm that the part numbers match those shown in your torch manual or consumable chart. Look at the data plate and manual for the torch model.Consumables for one torch family do not normally interchange with another, even when they look alike. If you are unsure, our team can help you match a kit to your torch.
Replace them when cut quality drops or when inspection shows wear. For many separate-part torches the maker suggests changing a standard copper electrode at the pit depth given in the manual, and a nozzle whose hole is nicked, oval or has rounded edges. Systems differ, so use the figures in your own manual.On systems that use a single-piece cartridge, replace the whole cartridge when the cut quality is no longer satisfactory or the nozzle hole is no longer round.
