0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing a powered air welding helmet.
It combines an auto-darkening welding helmet with a powered air purifying respirator. A battery-powered blower worn on the belt draws air through filters, and a breathing tube carries the cleaned air up into the helmet, where it flows over the face.The filters remove particles such as welding fume, and some systems can take a gas filter as well. The constant flow also keeps the face cooler and helps stop the visor fogging. It protects against what the filters are designed to capture, not against everything, so the filters must suit the work.
A standard helmet protects your eyes and face but does nothing for the air you breathe. Fume extraction captures fume at the source, but it may not catch everything, especially when you move around or work in awkward positions.A powered helmet protects the welder personally, wherever they work, and is useful for longer jobs, confined or poorly ventilated areas, and welding on materials with more hazardous fume. It is often used alongside extraction, not instead of it. Your risk assessment decides which controls you need.
The protection factor is a rating of how much a respirator reduces the amount of contaminant you breathe compared with the air outside. A higher number means more reduction, but the figure only applies when the whole system is correctly fitted, maintained and used with the right filters and a good face seal.The figure depends on the helmet and headtop combination, so check the maker's literature for your set-up. It is not a guarantee, and it does not cover gases or vapours unless you are using a suitable gas filter.
The helmet shell gives the head and face protection, and the filter in the front window darkens to protect your eyes from the arc. Different filters offer different features, such as a wider view, a number of shade ranges, a setting for tack welding, or a natural colour view.Some helmets are offered without a filter, so you can pick the one that suits your work. Think about the processes you do: for low-amp TIG a sensitive filter helps, and for heavy MIG a wide shade range is useful.
