SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
XC1000110SP XC1000 Water Cooler, with Snap Fitting Water Connections, 110v
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : XC1000110SP  

    XC1000 Water Cooler, with Snap Fitting Water Connections, 110v
    XC1000110SP

    £403.00  EX VAT
    SSP Suggested Selling Price = £450.00  YOU SAVE £47.00
     Buy in 3 easy interest free payments of £134.33† with

    The XC1000 is an improved version of the popular XC600 water cooler with a higher cooling capacity. The compact footprint makes these ideal for fitting onto the bottle carrier at the back of a power source or free standing. The Simaco rotary pump features a brass body and impeller to give a long lifespan. Four threaded mounts are provided underneath for fixing down if required. This unit is suitable for most welding applications up to 600A.

    Features

    • British designed & made.
    • Increased cooling capacity of 1000W.
    • Low power consumption of 190-220W allows direct connection onto many machine auxiliary supplies.
    • Very small footprint of 210mm x 247mm with fixing points underneath to allow easy mounting onto bottle trays etc.
    • Built in motor protection to prevent burnout if pump is blocked or stalled for any reason with automatic reset.
    • Built in splashguard for motor to stop spills dripping onto electric motor & splash-proof 'on off' switch fitted.
    • Quiet design keeps noise low & anti-vibration rubber feet fitted on base.
    • Simaco water pump fitted.
    • 100% copper heat exchanger tube & only copper or brass used on all fittings.

    Product Details

    Specification

    Max flow rate unrestricted: 10L/min
    Cooling capacity: 1000W
    Max pressure: 4.0 Bar
    Power consumption: 190-220W (110V @ 1.9A, 230V @ 0.9A, 400V @ 0.55A)
    Approx size & weight: 210mm x 247mm x 440mm high, dry weight 11Kg

    Fully CE marked & compliant with BS EN60974-2 2013 & BS EN60974-10 & RoHS & WEEE

    TIG Accessories FAQs

    Straight answers to the questions people ask most when choosing and using accessories for TIG welding.

    Do I need a water cooler, and what size?icon-minus-redicon-plus-red

    You need one if you use a water-cooled torch, which is the usual choice for higher currents and long, continuous welding. The cooler circulates coolant through the torch and cable, keeping them cool and allowing a lighter, slimmer cable than an air-cooled torch of the same rating.

    Check that the cooler suits your torch and your power supply: its voltage, its water connections, and its capacity to cool at the heat your torch produces. Some machines and trolleys have a cooler built in or a place to mount one.

    What should I put in a water cooler?icon-minus-redicon-plus-red

    Use the coolant recommended by the cooler's maker. Plain tap water can cause scale, algae and corrosion, and in cold weather can freeze and damage the pump and hoses. A proper coolant mixture protects against these problems.

    Check the level before you weld, top up with the correct fluid, and never run the torch without coolant flowing. Change the coolant at the intervals the maker gives, and follow the maker's instructions on disposal.

    What is a trailing shield and when do I need one?icon-minus-redicon-plus-red

    A trailing shield is an attachment that fits behind the torch cup and sends a stream of shielding gas over the weld after the torch has passed. Some metals, such as titanium and stainless steel, stay hot enough to oxidise as they cool, so the extra gas protects them while they cool down.

    It is most useful for reactive metals and for welds where discolouration is not acceptable. It must match your torch and be fitted so that it follows the weld evenly.

    What are purge flux, backing tape and foil tape for?icon-minus-redicon-plus-red

    They are ways of protecting the back (root) side of a weld from air. Purge flux is a paste painted on the reverse of a stainless steel joint to protect it from oxidation when a gas purge is not practical. Backing tape is stuck to the back of the joint to protect the root. Foil or similar tape is also used to seal the ends and gaps of a joint when it is purged with gas.

    Which is right depends on the metal and the job. Flux residue must be cleaned off afterwards, and some industries restrict what may be used, so check the requirements for your work and the maker's instructions.

    See all 6 questions for this category

    Shop Similar Categories