0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Practical answers on the small wear items that keep a welding helmet comfortable, secure and correctly positioned.
Use the correct replacement parts for your helmet. The HSE's PPE guidance advises using the correct replacement parts and following the manufacturer's replacement schedule, so a part that only looks similar is not good enough.Identify the helmet maker and type from the data plate or the manual, then match that to the part listed for it. Check how the part attaches, for example by clips, hook and loop or stitching, and how many pieces come in a pack. A part that is too short or too long will not sit properly or hold the helmet steady.
Yes. Check the helmet each time you put it on, looking at the band, the headgear and the adjusters. HSE guidance says workers should report any loss, destruction or obvious defect on the PPE they are given, and a helmet is part of that kit.A band that is torn, a ratchet that no longer holds or a cracked fixing point is a reason to stop and replace the part before you weld. Do not carry on with a helmet that moves or leaves gaps around the face.
Often yes. TWI lists local protection such as hoods and capes among effective ways of covering areas that could otherwise be exposed to direct arc radiation, and says the welder's clothing must cover the body, arms, neck and chest.TWI also notes that man-made fibres and plastics are not suitable because spatter or even infrared heat can melt them. Check that anything you add fits with the headband and does not stop the helmet sitting correctly, and follow your site's PPE rules and risk assessment.
There is no single figure. How often depends on how much you use the helmet, so replace the band when it looks worn or unhygienic, and check your helmet manual for the maker's own advice.Heavy use, hot work and a lot of sweating all shorten the life of a band. Replace it when it is dirty, stiff, worn thin, no longer stays in place or irritates your skin, and keep a spare so you can change it as soon as it needs it.