0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Practical answers on choosing nozzles, mixers and heating necks, and using and maintaining this style of heavy-duty gas welding and cutting torch.
Welding nozzles are chosen by the thickness of the material. TWI explains that the torch takes interchangeable nozzles so the flame intensity can be matched to the work, and a chart relates material thickness, nozzle size and welding speed. Thicker material needs a larger nozzle, and the gas pressures are set to suit the nozzle's flow rate.Nozzle numbering is not standard from one maker to another, so use the chart for the nozzles you actually have, and check which mixer and torch style they are made for. Our team can help you choose if you are unsure which size suits your job.
Follow the maker's lighting-up procedure. HSE says to purge the hoses before lighting to clear any potentially explosive gas mixture, use a spark igniter, and light the gas quickly after turning it on. Do not use a match or other flame, and point the torch away from yourself, other people and the hoses.Valve order and flame setting differ between fuel gases and torches, so use the instructions supplied with yours. Anyone new to oxy/fuel equipment should be shown how to purge, light and shut down before using it.
Check connections and equipment regularly. HSE advises a proprietary leak-detecting spray or solution suitable for oxy/fuel systems. Do not use soapy water or anything containing grease or oil on oxygen equipment, and never look for a leak with a naked flame.Repair or replace leaking components straight away. Leaking hoses should not be repaired, but a damaged section can be cut out and the hose tail refitted using crimp clips designed for the job, not screw-tightened clips. Equipment used in harsh conditions will normally need checking more often.
Heating nozzles are used for preheating, straightening, bending and similar work where you want a broad, high heat input rather than a cutting jet. A superheating or heating neck, together with a mixer made for the fuel gas, carries the gas to a larger heating nozzle. Some sizes are designed for acetylene and others for propane.HSE describes copper heating nozzles used with a propane mixer and heating neck, with a typical working distance of around 50 mm for maximum heat input. Always use a nozzle, neck and mixer that are made to work together, and check the maker's instructions.
