0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing equipment and consumables by maker.
Often it is the simplest route. Parts from one maker are designed to work together, so connections, controls and consumables line up, and you have a single source of advice and support. Some machines also use digital connections between the machine, torch and remote controls that only work with that maker's own parts.It is not essential, though. Many items, such as gas regulators, standard torch connectors, clamps and general safety equipment, follow common fittings and can be mixed. Check compatibility against the maker's information before combining parts from different makers.
Use the exact model name and, where there is one, the serial number or part number from the rating plate or the manual. Identify the part by its part number, or by its connection type, size and thread, rather than by appearance alone, because parts that look the same can differ in small but important ways.Also check the cooling method (gas or water), the current rating, the cable length and the type of connector. Models are revised over time, so two machines with the same name can have different versions. If you are not sure, our team can help you match the part to your machine.
Look first at the input supply: the voltage, whether it is single-phase or three-phase, and the input current. Then look at the output: the current range, and the duty cycle at a stated current, which tells you how long the machine can weld in a ten-minute period before it needs to cool.Also check which processes it supports, the wire or electrode sizes it takes, the cooling method, the weight and the protection rating. When you compare machines, compare duty cycle at the same current, because a high maximum current means little if the machine can only hold it for a short time.
Good support starts with clear manuals and technical data, a technical helpline or contact point, and a warranty with terms you understand. It is worth finding out who handles repairs and servicing, how long the maker supports a model, and whether training or demonstrations are offered.For machines with software or digital controls, ask whether updates are provided. Support matters most for equipment you rely on every day, where a machine out of action means lost work.
