SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
A5920 Furick No.5 Ally Pyrex Cup Kit for 2.4mm (1x Cup, 1x Collet Body, 1x Heatshield & 2 O-Rings)
  • A5920 Furick No.5 Ally Pyrex Cup Kit for 2.4mm (1x Cup, 1x Collet Body, 1x Heatshield & 2 O-Rings)
  • A5920 Furick No.5 Ally Pyrex Cup Kit for 2.4mm (1x Cup, 1x Collet Body, 1x Heatshield & 2 O-Rings)
Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

Rapid Ref : A5920  

Furick No.5 Ally Pyrex Cup Kit for 2.4mm (1x Cup, 1x Collet Body, 1x Heatshield & 2 O-Rings)
A5920

£25.00  EX VAT

Includes one Pyrex cup mounted on a collet body with 2.4mm diameter measurement, a heatshield and two spare O-rings.

This kit is designed for 9 and 20 size TIG torches. The Ally No.5 brand of Pyrex cups is of AC/DC polarity and has an amperage rating of 200.

Related Items

Furick Adaptors FAQs

Questions about adaptor kits and conversion parts that let an air-cooled TIG torch take a gas lens body, larger cups and clear cups.

What does a TIG torch adaptor kit actually change?icon-minus-redicon-plus-red

An adaptor kit swaps the parts at the front of the torch head so the torch can run a different style of cup, usually a larger or clearer one and often with a gas lens in place of a standard collet body. Typical contents are a collet body or gas lens body, a collet, a heat shield or insulator, O-rings and sometimes a cup.

The torch handle, cables and back cap stay the same. Check the kit contents against the torch you own and the electrode diameter you weld with, because the parts only work together as a matched set.

How do I make sure an adaptor kit fits my torch?icon-minus-redicon-plus-red

Start by identifying the torch type. Air-cooled TIG torches come in a small number of common head styles, and the style decides the size of the collet body, gas lens and cups you need. Look for the type marking on the torch head or in the manual, and compare the length of your existing collet body with the product description.

Cup threads are not universal, so check the thread on the body you are fitting before buying cups for it. If the markings are worn or you are unsure, the data plate, the manual or our team can help you confirm the match before you order.

Which cup can I fit once I have changed the body?icon-minus-redicon-plus-red

Cups are matched to the thread of the body or lens, so a gas lens body needs gas lens cups and a standard collet body needs collet body cups. Check the thread and the cup size marking before ordering.

Once the thread fits, choose size by coverage and access. A larger opening gives more gas coverage and suits larger electrodes and higher current, while a smaller cup gets into tight spaces but speeds the gas up, which can add turbulence. Use the largest cup the joint allows.

What does the heat shield or insulator in an adaptor kit do?icon-minus-redicon-plus-red

It sits behind the cup, between the cup and the torch head, and is generally there to protect the head from heat and to help hold the cup and seal the gas path when a wider gas lens cup is fitted. It is a wearing part.

Replace it if it is cracked, distorted or scorched, and always use the one made for your torch type and body style. Leaving it out, or using the wrong one, can leave a gap where gas escapes and the head is exposed to more heat than it was designed for.

See all 6 questions for this category

Shop Similar Categories