SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
9873024 Kemppi Beta e90X Welding Helmet, with Variable Shade 9-15 ADF and Flip Front for Grinding
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 9873024  

    Kemppi Beta e90X Welding Helmet, with Variable Shade 9-15 ADF and Flip Front for Grinding
    9873024

    £201.50  EX VAT
    SSP Suggested Selling Price = £242.00  YOU SAVE £40.50
     Buy in 3 easy interest free payments of £67.17† with
    Shop Parts

    BETTER VISIBILITY, BETTER PROTECTION

    Kemppi presents its latest line of Beta welding helmets. The e90 range is designed for professional welders who want a comfortable fit and reliable eye protection. Weighing from approximately 473g to 525g depending on the model, the Beta range delivers exceptional comfort without compromising protection. Among the lightest face shields in Kemppi's welding protection catalogue, these models are designed for extended use, with generously sized shells that offer outstanding eye protection from arc radiation and increased side coverage for enhanced safety. The flip-up welding lens is perfectly positioned for pre- and post-welding inspection. A robust, cost-efficient solution for light- to medium-duty welding tasks.

    Features

    • For welding, tacking, cutting, grinding and inspection
    • Flip-up welding lens with GapView stage position
    • ComFlex headband allows the perfect fit
    • Optional leather neck protectors
    • Lightweight –  from only 473g (depending on model) 
    • XA 47 LiFE+ Colour ADF including shades 14 and 15
    • Certified to EN 175 B

    Product Details

    Technical specifications Value
    Welding filter type XA 47
    ADF view size (mm) 97 x 47
    ADF switching time 0.1 ms
    ADF light state 4
    ADF shade range 9 - 13/14 - 15
    ADF sensors 2
    ADF UV/IR protection At all times
    ADF battery type 1 x CR2032
    ADF remote control No
    ADF classification 1/1/1/2 
    Grind mode Yes
    Flip-up visor Yes
    Impact rate EN 175 B
    Operating temperature -5 - 55 °C
    Storage temperature -20 - 50 °C
    Recommended maximum humidity for use 80%
    Materials 100% cotton, PA, Padding foam plastic, PC, POM, PP 
    Weight without accessories 525g
    Standards EN 175 B, EN 166 B, EN 379, AS/NZS 1337.1, AS/NZS 1338.1 

    Related Items

    Kemppi Welding Helmets FAQs

    Practical answers on choosing, using and looking after branded auto-darkening, passive and grinding welding helmets.

    How do I choose the right shade for my welding process and current?icon-minus-redicon-plus-red

    Shade depends on the process and the welding current. As a general guide, low-current TIG sits in a lighter range than stick or MIG at higher current, and cutting or brazing with a flame uses the lightest shades. Charts such as those published by welding bodies are a starting point only.

    A common approach is to begin with a shade that is slightly too dark and then move lighter until you can see the weld pool comfortably, staying inside the range the chart gives. Variable-shade helmets let you adjust this job by job. Check the helmet's manual for its own shade guide.

    Does an auto-darkening helmet still protect my eyes when the filter is clear?icon-minus-redicon-plus-red

    Yes, in a correctly working filter. The clear (light) state is only a low shade for seeing the work before you strike the arc. Auto-darkening filters are designed to block ultraviolet and infrared radiation at all times, whether the filter is light or dark, and makers state this in their data sheets.

    That protection does not make it safe to look at an arc through a filter that has failed to darken. If the filter ever stays light when you strike an arc, stop welding, close your eyes and check the helmet before carrying on. See the manual for what to do if it fails to switch.

    When should I replace the front cover lens?icon-minus-redicon-plus-red

    The clear cover lens takes the spatter and scratches so the filter behind it does not. Makers say to replace a front cover lens that is cracked, scratched or pitted, and to do it regularly rather than waiting until you cannot see through it.

    A marked cover lens makes the weld harder to see and can interfere with the sensors that detect the arc. Avoid resting the helmet face-down on a bench, as this scratches the lens. Use only the replacement lenses the maker specifies for your helmet, and fit the inner cover lens as well, as the filter is designed to be used with it.

    How do I clean the filter and sensors?icon-minus-redicon-plus-red

    Clean the filter surface regularly with clean water and a lint-free or microfibre cloth. Do not use strong cleaning solutions, solvents or oil-based products, which can damage the surface. Keep the arc sensors and the solar cells clean in the same way, because dirt or spatter on them can stop the filter darkening properly or make it flicker.

    The shell and headband can usually be washed with a neutral detergent. Always follow the manual for your model, as materials differ.

    See all 6 questions for this category

    Shop Similar Categories