Helmet Consumables FAQs
Practical answers on the small wear items that keep a welding helmet comfortable, secure and correctly positioned.
How do I make sure I order the right replacement band or headgear part?
Use the correct replacement parts for your helmet. The HSE's PPE guidance advises using the correct replacement parts and following the manufacturer's replacement schedule, so a part that only looks similar is not good enough.
Identify the helmet maker and type from the data plate or the manual, then match that to the part listed for it. Check how the part attaches, for example by clips, hook and loop or stitching, and how many pieces come in a pack. A part that is too short or too long will not sit properly or hold the helmet steady.
How should I look after my helmet and spare bands when not in use?
The HSE says reusable PPE must be cleaned and kept in good condition, and stored properly when not in use, for example in a dry, clean cupboard. That applies to a welding helmet and its spare bands as much as any other kit.
Keep spares somewhere clean and dry so they do not pick up grit or grease from the workshop, which could irritate your skin or work into the adjusters. Follow the maker's cleaning instructions, and avoid strong solvents unless the manual allows them.
Should I check my helmet and bands regularly?
Yes. Check the helmet each time you put it on, looking at the band, the headgear and the adjusters. HSE guidance says workers should report any loss, destruction or obvious defect on the PPE they are given, and a helmet is part of that kit.
A band that is torn, a ratchet that no longer holds or a cracked fixing point is a reason to stop and replace the part before you weld. Do not carry on with a helmet that moves or leaves gaps around the face.
Why does the helmet need to sit properly on my head?
A helmet only protects when it stays in the right place. TWI says the shield has to be designed to screen the entire face, ears and portions of the neck from the arc, so a helmet that slips or sits crooked can leave skin exposed.
TWI also explains that arc eye is caused by UV radiation from the arc. Arc eye is usually temporary, but it is painful. Replace headgear that no longer holds the helmet firmly, and check the fit every time you put it on.