0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Genuine Optrel Front Cover Lens (Pack of 2). Fits - Optrel Sphere X, Crystal 2.0, Vegaview 2.5, e684, e680, e670, e650, e640 or Satellite.
Spares for one maker's powered-air welding helmet and earlier-generation blower system: headbands, fixings, repair sets, filters and protective extras.
Use the labels on the helmet and the blower unit and the manual that came with them. Makers often change blower, battery and filter designs between generations, so parts that look alike may not be interchangeable. A part number on the old part, or in the manual's parts list, is the surest match.HSE guidance says to follow the manufacturer's instructions for maintenance and, ideally, to source replacement parts from the original manufacturer so the equipment keeps performing as intended. A part the maker does not list for your system may not give the protection intended. If you are unsure, our team can help you check before you order.
A headband carries the helmet's weight and sets how it sits on your head, so wear shows up as comfort problems. Look for cracked or stretched plastic, a ratchet or adjuster that slips, worn or hard sweatband padding, and loose or damaged mounting points.A helmet that drops, tilts or will not hold its position can let the visor sit wrongly and spoil your view and your protection. Replace the headband with the part made for your helmet, and fit it as the manual shows. Sweatbands are often replaced separately, so you may not need a whole new headband.
Helmets are held together by small parts such as bolts, quarter-turn fixings, pivots and clips, which can wear, crack or go missing with daily handling. A repair set usually groups the common wear items for one helmet type so a single fault does not take it out of use.Check the manual or parts list to see exactly what a set contains for your system. Replace threaded or turn fixings that are stripped or loose rather than forcing them, and use the correct ones, as the wrong size can damage the shell. Never use a helmet with a broken or missing fixing.
HSE says welders' skin can be exposed to ultraviolet radiation, with sunburn-like reddening the commonest result, so covering the neck and the gaps around the helmet helps. A leather or flame-resistant head and neck cover also helps against spatter and sparks.It must suit your helmet. Some covers are not suitable for every helmet or powered-air configuration, so read the part description and manual and confirm it does not block airflow, the seal or the hose connection. Check it regularly and replace it if it is scorched, hardened or split.