SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
4441.660 Optrel Panoramaxx 2.5 PAPR Welding Helmet
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 4441.660  

    Optrel Panoramaxx 2.5 PAPR Welding Helmet
    4441.660

    £589.00  EX VAT
    SSP Suggested Selling Price = £652.00  YOU SAVE £63.00
     Buy in 3 easy interest free payments of £196.33† with
    Maxximize your horizon. 

    Welcome to the big leagues. The Panoramaxx 2.5 combines the enormous field of vision with Optrel's well-known 2.5 technology and offers excellent visibility in every working situation – whether for welding, cutting, grinding or fabrication work. Whatever you want, the Optrel Panoramaxx 2.5 automatically follows your versatile field of activity.

    Brochures & Manuals

    BROCHURES & MANUALS
       Optrel Panoramaxx 2.5 Manual

    Related Items

    Optrel Panoramaxx with e3000X System Parts FAQs

    Practical answers on choosing, fitting and looking after the spare parts for a powered air welding helmet system.

    When should I change the filters on a powered air helmet?icon-minus-redicon-plus-red

    Change them as the maker's instructions say, and sooner if a filter is damaged, visibly contaminated or breathing becomes harder. The HSE says filters for powered respirators, marked TH or TM, should be changed as the manufacturer instructs. Maker manuals add that used filters cannot be cleaned or reused, and that cleaning with compressed air or water can damage them.

    Many systems have a filter alarm. When it sounds, leave the work area and change the pre-filter. If the gaps between alarms keep getting shorter, replacing the main filter as well is usually recommended. Fit only the filter type the maker lists for your system.

    What should I check before each use of a powered air helmet?icon-minus-redicon-plus-red

    Follow the maker's pre-use check every time. A typical routine is to make sure the spark protector, pre-filter and main filter are fitted and the cover clicks shut, check the air hose and connections for holes, cuts or cracks, switch on and watch the start-up self-test, then test the low airflow alarm by blocking the end of the hose with a clean palm until it sounds.

    If the alarm does not sound, or you find damage, do not use the unit until it is put right. HSE guidance says never to keep working if the fan stops or the flow rate falls; leave the work area.

    What do the battery and filter alarms mean, and what should I do?icon-minus-redicon-plus-red

    Maker manuals describe a low battery alarm and an airflow or filter alarm, usually a red light and an audible signal. If either sounds, the instruction is to leave the danger area at once. After that, charge or replace the battery, or replace the filter.

    HSE guidance says never to keep working if the fan stops or the flow rate falls. A powered air unit with particle filters does not protect against gases, so leaving promptly matters. Do not take the helmet off until you are clear of the contaminated area, and follow your manual and risk assessment.

    Which parts of a powered air helmet system wear out?icon-minus-redicon-plus-red

    Maker parts lists show the replaceable items: the main filter, pre-filter, spark protector, filter cover, battery, face seal, air hose and the protective cover for the hose. Seals, including the one between the filter and the blower, are replaced when worn or damaged.

    The hose cover loses its flame-retardant effect with ultraviolet and infrared exposure, so replace it when it fades or bleaches and at the maker's interval. Manuals say not to use the system until worn or damaged parts are replaced. Heavy grinding and spatter shorten the life of filters and protectors.

    See all 6 questions for this category

    Shop Similar Categories