0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
This product is made exclusively for the 3M G5-01/03 Heavy Duty Welding Helmets when applied with the adjustable headband. This item was designed to be attached to the back of the headband to provide support and relieve pressure for the welder. This product is a replacement spare part. Once the back support has become worn /damaged, please replace it ASAP.
Straight answers to the questions people ask most when choosing and looking after spare parts for a heavy-duty powered air welding helmet.
Check the model marking on the helmet and the filter, then compare it with the parts list in the user manual. Heavy-duty helmets are often sold in several versions, with different filters, head protectors and air ducts, so what fits one may not fit another.If an old part is still in place, note any number printed on it and compare it side by side with the replacement. Where you are unsure, our team can help you match the part to the helmet before you order.
The outer protection plates wear fastest, because they take spatter and scratches. After that come the sweatbands, which absorb sweat and break down, and the head and neck protectors, which wear from heat and washing.Filters for the powered air unit, the face seal and the battery are all consumable too. Keeping a few spare outer plates and a sweatband means you can stay protected and comfortable without waiting when one is spoilt.
Towelling and fleece-type bands absorb sweat well and feel soft but wear quickly and need replacing often. Leather bands last longer and are easier to wipe clean, but they feel firmer and can be warmer.Whichever you prefer, replace the band when it is hard, stained or no longer comfortable. A fresh band also keeps sweat from running into the headband mechanism and the helmet interior.
A magnifying lens fits behind the welding filter and makes fine detail easier to see, which is helpful for close TIG work or when your eyesight needs a little help. The strength is measured in diopters, and a higher number gives more magnification.Start with a lower strength and move up only if you need to. Too much magnification makes your working distance awkward, and anyone with a prescription should check with their optician first.