0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
This product is made exclusively for carrying 3M branded Adflo batteries. The battery pouch is made from flame-retardant materials and textiles to provide top-quality protection for the Adflo battery against sparks and flames when using the 3M Adflo PAPR System. This item was intended to be used for powering the 3M Task Light when using the supplied air regulators. This product can be worn with 3M branded belts.
Straight answers to the questions people ask most when choosing and looking after spare parts for a heavy-duty powered air welding helmet.
Check the model marking on the helmet and the filter, then compare it with the parts list in the user manual. Heavy-duty helmets are often sold in several versions, with different filters, head protectors and air ducts, so what fits one may not fit another.If an old part is still in place, note any number printed on it and compare it side by side with the replacement. Where you are unsure, our team can help you match the part to the helmet before you order.
The head and neck protector covers the areas around the helmet shell and stops arc light, spatter and fume reaching your skin. They come in fabric, flame-retardant fabric and leather, in different sizes.Leather tends to last longest in heavy spatter and overhead welding, while fabric is lighter and cooler. Pick the one that matches the heat and spatter at your workplace, and make sure the size gives full coverage without pulling on the helmet.
Change it when your view is reduced by scratches, spatter marks or pitting, or when it is cracked or warped by heat. A damaged plate also scatters light, which tires your eyes.Heat-resistant and scratch-resistant plates last longer in tough conditions. Always fit the plate the way the manual shows and check that it seats flat so that no spatter can get behind it.
A magnifying lens fits behind the welding filter and makes fine detail easier to see, which is helpful for close TIG work or when your eyesight needs a little help. The strength is measured in diopters, and a higher number gives more magnification.Start with a lower strength and move up only if you need to. Too much magnification makes your working distance awkward, and anyone with a prescription should check with their optician first.
