0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing accessories for a plasma cutting system.
Many accessories are made for a particular model or size of power source, such as dust covers, wheel kits, filter kits and cables. Check the model on your cutter's data plate and compare it with the compatibility stated for the accessory.Generic items such as face shields and gloves usually suit any cutter, but cutting guides depend on the torch type and head. If you are unsure, check your manual or ask our team to help match the item to your machine.
A filter kit sits on the air line close to the plasma cutter and removes moisture, oil and fine particles before they reach the torch. Wet or dirty air makes the arc unstable and shortens consumable life.It is especially useful when the air comes from a long hose, an older compressor or a damp workshop. Check and drain it regularly and replace the element according to the maker's instructions.
Dust and grit get into vents and connectors on busy sites and workshops, and a cover helps keep them clean when the machine is not in use. A torch sheath protects the lead from abrasion, heat and cuts, which extends its life.Covers should only be fitted when the unit is switched off, unplugged and cool. Never run the machine with a cover blocking the air vents.
Heavier plasma units are awkward to lift, and a wheel kit or cart makes it easier to move them around a workshop or site and keeps the machine off a damp or dusty floor. They also give you somewhere to store the cables and torch.Make sure the kit is made for your unit and is rated for its weight, and be careful on slopes and uneven ground.