For demanding TIG welding applications.
The Origo™ TIG 4300iw provides excellent arc strike and consistent, stable arc in both DC and AC modes. Origo™ TA24 AC/DCs offer the necessary functions for TIG AC/DC and MMA AC/DC welding in an easy-to-understand MMC panel. AC Balance is the setting to control arc cleaning and penetration, and AC Frequency is the setting to control arc width. It also has a setting to control electrode preheating, with the possibility of having different electrode shapes and, at the same time, providing better starts with an extended electrode lifetime.
One of the most important tasks of a TIG welding power source is to provide a stable arc. The QWave function optimises the AC waveform to give a smooth arc and, at the same time, the lowest possible noise without compromising the weld result.
Features
- Designed for quality TIG welding in all types of material
- QWave™ enables AC welding with high arc stability and low noise
- AC Frequency and Balance control - optimise weld pool
- Electrode preheating - excellent start and extended electrode lifetime
- DC Pulsed TIG welding - easy control of heat input and the weld pool
- DC Micro Pulse - minimise heat affected zone, especially on thin sheets
- ESAB LogicPump - ELP, automatic start of the cooling unit by the connection of a liquid-cooled torch
- Energy save mode - fan and pump on demand
- ESAB 2-program function - possibility to pre-program and change program during the actual welding
- User-friendly TA24 AC/DC panel - all welding parameters are presented in an easy-to-understand panel
- Min/max current setting at TA24 AC/DC when using T1 Foot CAN
- True MMA welding characteristics in AC and DC mode - Hot start, Arc force, and polarity switch (DC)
- VRD (Voltage Reduction Device) - a safety function when welding in MMA mode