0 items in your basket
Total £ 0.00 EX VAT
MIG Gloves
TIG Gloves
Baseball Caps
Armguards
TIG Heat Blockers
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Oxy / Acetylene Trolley with pneumatic wheels for uneven terrains.
Straight answers to the questions people ask most when choosing and using gas bottle trolleys.
A single trolley carries one cylinder and is the right choice for shielding gas, or for moving one cylinder around a workshop. A twin trolley carries two, normally an oxygen and a fuel gas cylinder side by side, and is the standard choice for oxy-fuel cutting and welding.Twin trolleys are heavier and larger, and take more room to turn and store. Pick the type that matches how many cylinders you actually use together, and check that your cylinder sizes fit.
Pneumatic (air-filled) wheels absorb bumps and are easier to push over rough ground, gravel, kerbs and outdoor surfaces, so they suit site work. Solid or puncture-proof tyres never go flat and need no maintenance, which suits smooth workshop floors and places where a puncture would be a nuisance.Larger wheels roll more easily over obstacles. Pick the wheel type to suit the ground you move over most often. Pneumatic wheels need occasional pressure checks.
Follow your site procedure and the advice of your gas supplier, because the right practice depends on the equipment, the distance and the ground. For a short move on a level floor, equipment is often moved with the cylinder valves closed and the hoses and torch secured so they cannot snag or be pulled.For longer moves, rough ground, steps or vehicles, the usual safe practice is to close the valves, release the pressure and remove the regulator, then fit the valve protection cap where the cylinder has one. Check your gas supplier's guidance and your risk assessment for your own set-up.
Tilt it back gently so the weight is on the wheels, and move it at a walking pace, pushing it ahead of you rather than pulling it. Plan the route first and keep clear of slopes, kerbs, steps and uneven ground.A loaded twin trolley is heavy, so use the handle, keep your back straight, and get help or use a suitable lifting aid for steps and vehicles. Manual handling risks should form part of your risk assessment, and the HSE publishes general guidance on safe handling.
